Category: JCN Newswire

MIE, Japan, August 4, 2025 - (JCN Newswire via SeaPRwire.com) – Honda factory team*1 “Honda HRC” (CBR1000RR-R FIREBLADE SP: Takumi Takahashi / Johann Zarco) has won the 2025 FIM*2 Endurance World Championship “Coca-Cola” Suzuka 8 Hours Road Race 46th Annual Event (Suzuka 8 Hours) held at the Suzuka Circuit in Mie, on Sunday, August 3.This win marks Honda HRC’s fourth consecutive Suzuka 8 Hours victory. Team rider Takumi Takahashi has extended his outright record of the most Suzuka 8 Hours wins to seven (four consecutive), while Johann Zarco achieves his second consecutive victory. This victory also marks Honda’s 31st win at the event.*1 Factory team: Racing team managed by the bike manufacturer*2 FIM: Federation Internationale de MotocyclismeTakumi Takahashi (center) and Johann Zarco (right) on the podiumHonda HRC teamHonda HRC, which won the Suzuka 8 Hours once again, recorded the fastest lap time in the qualifying session held on Friday, August 1, securing its spot in the Top 10 Trial, in which the top 10 qualifying teams compete for final grid spots. In the Top 10 Trial held on Saturday, August 2 at 3:30 pm, Takahashi and Zarco took to the track, with Zarco recording a lap time of 2 minutes 4.290 seconds, a new Suzuka 8 Hours lap record, to secure pole position.The Suzuka 8 Hours race started at 11:30 am on Sunday, August 3, with Takahashi as lead rider for the fourth consecutive year. Takahashi took the hole shot, and after relinquishing the lead and maintaining second place for several laps, regained the lead on Lap 14, after which he gradually expanded his advantage. In the subsequent stints with Zarco and Takahashi taking turns on the bike, the team demonstrated consistent performance, leveraging fuel efficiency and quick pit work to extend the time gap, opening a one-lap advantage over second place by the midpoint of the race. In the closing stages, two safety car deployments closed the gap, but Honda HRC capitalized on the competing team’s final pit stop to create a 40-second lead which was maintained to the checkered flag. Zarco crossed the line at 7:30 pm completing Lap 217, securing Honda HRC’s fourth consecutive Suzuka 8 Hours victory.Takumi Takahashi | Honda HRC“I’m glad it went smoothly. It was a last-minute decision to compete with only two riders, and I knew it would be tough. I’m so exhausted. Toward the end, Johann’s condition looked tough, so I focused on doing my best to hand him the bike in good shape. In my final stint, I aimed to pull away by getting into the [2 minute] 6-second range, but due to the intense pressure from behind, I switched to maintaining the gap and handing over the bike safely. Johann really gave it everything. I’m so grateful to him. The team and everyone else worked hard, and I’d like to thank all the fans who supported us.”Johann Zarco | Honda HRC“I’m tired, just like Takumi. Race control was good, but it was difficult to recover between stints, and I couldn’t recover as much as I had hoped. When the safety car came out in Takumi’s final stint, he was able to extend his laps on track to give me more time to recover. The safety car came out for the second time during my stint, which allowed me to gradually regain my rhythm. After dusk, I was able to control the gap and finish the race enjoying the beautiful scenery. Takumi is a strong rider who can handle the heat well and didn’t show any signs of fatigue, which I think contributes to the team’s strength. I don’t want to race with only two-riders next year though. Honda has a fuel-efficient bike, which gives us a big advantage, and we were able to finish the race with seven pit stops. I would like to thank everyone on the team.”Teruaki Matsubara | Honda HRC team manager“This was an outstanding result, and I am very satisfied. First, I would like to express my heartfelt gratitude to both riders who worked so hard and did a great job in such harsh conditions. I would also like to thank everyone on the team who supported the riders with everything they had. They truly showed what teamwork is about. Once again, our pit stops were the fastest, which made a big difference. All of our preparations paid off today. It wasn’t an easy race, but in the end, everything came together perfectly. It was a really fun and rewarding experience.”Koji Watanabe, President of Honda Racing Corporation“I would like to express my heartfelt gratitude to Honda HRC riders Takumi Takahashi and Johann Zarco, the team staff, and everyone else involved for their outstanding teamwork in securing victory despite the extreme heat and the pressure of aiming for a fourth consecutive title. Takahashi has set an incredible record by achieving his seventh victory at the Suzuka 8 Hours, breaking his previous record for the most wins at the event. I would also like to extend my respect to Johann Zarco for his contribution in continuing to compete this year. I would like to once again express my gratitude to all the sponsors who supported our participation and to all the fans who cheered us on during the race. Going forward, HRC will continue to take on the challenge to meet the expectations of motorsports fans and Honda fans alike. We look forward to your continued support and encouragement.” Copyright 2025 JCN Newswire via SeaPRwire.com.

Kawasaki and Tokyo, Japan, August 4, 2025 - (JCN Newswire via SeaPRwire.com) - MUFG Bank, Ltd. (hereinafter MUFG Bank) and Fujitsu Limited (hereinafter Fujitsu) today announced the signing of a Memorandum of Understanding (MOU) to establish a comprehensive preventive health ecosystem. The strategic partnership, signed on August 1, aims to develop new services and innovations in the health domain by promoting and integrating advanced, data-driven health promotion and prevention solutions, directly addressing Japan's pressing societal challenges: a rapidly super-aging population and the increasing prevalence of lifestyle-related diseases. Despite the existence of numerous Personal Health Record (PHR) [1] services in Japan, their widespread societal implementation is hampered by fragmented data and a lack of standardized interoperability. Recognizing this critical gap, MUFG Bank and Fujitsu started a collaboration, leveraging MUFG Bank's strong commitment to business co-creation and extensive network in Japan and globally, and Fujitsu's leadership in system development and data utilization. The collaboration aims to enable the seamless linkage and utilization of life log data across companies, fostering a robust and effective preventive health ecosystem alongside partner enterprises.The project signifies a powerful convergence of financial and technological strengths to create sustainable solutions for complex societal health challenges. Moving forward, MUFG Bank and Fujitsu are committed to expanding their efforts beyond current health prevention domains to broadly extend healthy lifespans across Japan.Figure 1: Diagram of the collaborationKey initiatives of the collaboration:1. Ecosystem development & innovation support: MUFG Bank will contribute to solving issues related to Japan’s super-aging society, industrial development, and innovation support. Fujitsu will establish a platform that enables data linkage among various well-being-related companies, delivering personalized services based on individual lifestyle data.2. Personalized health promotion: The two companies will actively seek partner companies in the health domain to promote data-driven well-being and performance improvement. The partners will further leverage Fujitsu’s data platform and AI to collect and analyze life log data to provide personalized behavioral change plans, drawing on behavioral theories and advanced AI technology (such as "dropout prevention AI") to help individuals maintain healthy habits and maximize organizational well-being.3. Joint pilot project: From July 7, 2025, MUFG Bank and Fujitsu will launch a joint pilot project focusing on exercise & diet at MUIC Kansai [2], an innovation hub set up by Mitsubishi UFJ Financial Group, Inc. [3] and MUFG Bank in Japan’s Osaka Prefecture. The pilot will involve a cutting-edge sports gym operator and an athlete-focused meal delivery startup and will analyze data on training and meal usage to understand their correlations.[1] PHR:A system for managing individual health data, including personal health status and physical information such as exercise, diet, and sleep.[2] MUIC Kansai: An innovation hub operated by Kansai Innovation Center, a general incorporated association established by Mitsubishi UFJ Financial Group, Inc. and MUFG Bank in Osaka City, Osaka Prefecture, Japan. It is a membership-based hub aimed at supporting startups and other initiatives.[3] Mitsubishi UFJ Financial Group, Inc.:Headquarters: Chiyoda-ku, Tokyo, Japan; President and Group CEO: Hironori KamezawaAbout MUFG BankMUFG Bank, Ltd. is Japan’s premier bank, with a global network spanning around 40 countries. Outside of Japan, the bank offers an extensive scope of commercial and investment banking products and services to businesses, governments and individuals worldwide. MUFG Bank’s parent, Mitsubishi UFJ Financial Group, Inc. (MUFG) is one of the world’s leading financial groups. Headquartered in Tokyo and with over 360 years of history, MUFG has a global network with approximately 2,000 locations in more than 40 countries. The Group has about 150,000 employees and offers services including commercial banking, trust banking, securities, credit cards, consumer finance, asset management, and leasing. The Group aims to “be the world’s most trusted financial group” through close collaboration among our operating companies and flexibly respond to all of the financial needs of our customers, serving society, and fostering shared and sustainable growth for a better world. MUFG’s shares trade on the Tokyo, Nagoya, and New York stock exchanges. For more information, visit https://www.mufg.jp/englishAbout FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers around the globe, our 113,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: AI, Computing, Networks, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.6 trillion yen (US$23 billion) for the fiscal year ended March 31, 2025 and remains the top digital services company in Japan by market share. Find out more: global.fujitsuPress ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

Queensland, AU, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - Queensland’s most significant International Education and Training (IET) and Research and Innovation (R&I) trade mission has taken to the global stage, with 38 of the state’s leading institutions and companies visiting Expo 2025 Osaka, Kansai, Japan, in July.Led by Minister for Finance, Trade, Employment and Training Ros Bates, the delegation was advancing Queensland’s global footprint through high-level meetings in Taiwan and Japan, culminating in a showcase at Expo 2025 Osaka.The visit follows the release of the Queensland-Japan Trade and Investment Strategy 2025-2028, which outlines practical steps to grow collaboration in education, research and commercialisation, matching Queensland’s strengths with Japan’s future needs.At the Australia Pavilion on July 17, Minister Bates hosted a major Queensland reception with Japan government representatives, alumni, and education leaders.This trade mission shows Queensland’s renewed commitment to international engagement, with a focus on building collaborative research partnerships, expanding student mobility, and promoting the Study Queensland brand to meet demand in Asia.This was Minister Bates’ second international trade mission to Japan, after visits to India, Korea, China and Hong Kong, and Singapore.International education remains Queensland’s biggest services export, worth $6.85 billion, and supporting around 30,000 jobs. In 2024, more than 157,000 international students from 160 countries studied in Queensland.“We’re reinforcing Queensland’s reputation as a reliable economic partner, and a favorable destination for international students and research and innovation,” Minister Bates said.“Queensland is open for learning, open for business, and ready to lead.” Expo 2025 Osaka, Kansai, Japan (www.expo2025.or.jp/en/) runs from April 13 - October 13, 2025.Contact:Illka GobiusPinpoint PRillka@pinpointpr.sg Copyright 2025 JCN Newswire via SeaPRwire.com.

Queensland, AU, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - In a landmark step for international clean aviation collaboration, Queensland aerospace innovator Stralis Aircraft has officially signed a Memorandum of Understanding (MoU) with the Joint Research Center for Electric Architecture, Akita University and Akita Prefectural University, at Expo 2025 Osaka.MOU Signing Ceremony, Australia Pavilion, Expo 2025 Osaka. From left: Junichi Sakaki, Director of the Joint Research Center for Electrification Architecture, Akita University, Hon. Ros Bates, Minister for Finance, Trade, Employment and Training, Queensland, Australia, and Bob Criner, Co-founder and CEO of Stralis Aircraft. [July 17, 2025]The MoU signing was held at the Australia Pavilion in the presence of the Hon. Ros Bates MP, Queensland Minister for Finance, Trade, Employment and Training, as part of the Queensland Government's flagship international trade mission to Japan."Stralis is a great example of how Queensland businesses can lead the world in clean aviation technology. We’re backing them in order to scale, export and grow jobs," Minister Bates said. "It's not just an MoU — it's a runway for clean technology, innovation, and workforce development between Queensland and Japan."Under the agreement, Stralis will test its hydrogen-electric propulsion components at one of Japan's most advanced electric aircraft testbeds, operated by the Joint Research Centre for Electric Architecture in Akita's state-of-the-art all-electric aircraft testbed.The deal will also support new training and skills pathways for future aviation engineers and technicians, backed by industry and academic partnerships.Stralis' proprietary hydrogen-electric system is six times lighter than existing fuel cell solutions, enabling hydrogen aircraft to fly ten times further than battery-electric alternatives, at half the cost of fossil fuel-powered planes.The signing took place during a dedicated International Education, Research and Innovation Showcase hosted by Minister Bates at the Australia Pavilion, with Queensland as a Gold Partner of EXPO 2025."I'm extremely excited to begin our collaboration with this world class team and facility in Akita," said Bob Criner, Co-Founder and CEO of Stralis Aircraft."Japan has been a global leader in aerospace and hydrogen innovation for decades. This partnership will accelerate our hydrogen aircraft technology development and facilitate skills and knowledge exchange between our organisations."It will also allow Stralis to create cutting-edge research and innovation jobs in Queensland, where our workforce is prepared to manufacture and export advanced aircraft technology in the future.""We are pleased to sign this MoU with Stralis," said Junichi Sakaki, Director, Joint Research Center for Electric Architecture, Akita University / Akita Prefectural University."This collaboration in aircraft system electrification, using our testing facilities in Akita, represents a meaningful step in international technological cooperation. We look forward to contributing to both talent development and a more sustainable future."Supported by Trade and Investment Queensland (TIQ) Japan, Strali has been in high-level discussions with Japanese aerospace firms aligned with Japan's Ministry of Economy, Trade and Industry (METI) and its 2035 target to commercialise decarbonised passenger aircraft.Stralis is also planning to fly its Bonanza A36 hydrogen-electric demonstration aircraft in Japan in late 2026, showcasing the commercial and environmental viability of its technology.This agreement adds momentum to Queensland's broader trade mission in Japan, which is focused on expanding partnerships in International Education, Research and Innovation, advanced manufacturing, and the Queensland–Japan Trade and Investment Strategy 2025-2028, released this July, which places innovation-led collaboration at the core of the Queensland–Japan relationship.Contact:Minister Bates' Media Contact: Illka Gobius, Pinpont PR, illka@pinpointpr.sk Stralis Media Contact: https://stralis.aeroDr Emma Whittlesea, Stralis, Head of Partnerships, ew@stralis.aeroBob Criner, Co-Founder & CEO, Stralis Aircraft, bc@stralis.aero Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - Hitachi, Ltd. (TSE:6501, “Hitachi”) and, its subsidiary, Hitachi Global Life Solutions, Inc. (“Hitachi GLS”), announced that they have completed the capital reorganization of their air conditioning joint venture, based on the agreement signed on July 23, 2024*1. Under this reorganization, Hitachi GLS transferred all of its shares in Johnson Controls-Hitachi Air Conditioning Holding (UK) Ltd. (“JCH”), a joint venture with Johnson Controls International plc(“JCI”), to Robert Bosch GmbH (“Bosch”)*2, and has completed the acquisition of the Shimizu Factory, which had been owned by JCH and served as its development and production base for commercial air conditioning equipment in Japan*3Going forward, Hitachi GLS will accelerate a global expansion of Hitachi-branded air conditioning products through Bosch Home Comfort Group (“Bosch HC”), Bosch’s HVAC*4 business unit. Meanwhile, Hitachi will utilize its domain knowledge acquired through the Shimizu Factory to further strengthen its “Lumada 3.0” green cooling solutions through “One Hitachi” by combining the large installed base of HVAC units, AI, and digital capabilities to accelerate the expansion into growing markets such as green buildings and data centers. This will contribute to the realization of a harmonized society where environment, well being, and economic growth are in balance, as envisioned in Inspire 2027, Hitachi Group’s new management plan.Aim of the Hitachi Group1. Strengthening the Global Expansion of Hitachi-branded Air Conditioning Products, and an Expansion of the Partnership with BoschUnder a brand license agreement with Bosch HC, Hitachi GLS will accelerate global expansion by utilizing Bosch’s global footprint centered in Europe and promoting sales of highly competitive, Hitachi-branded residential air conditioning products in the residential and light commercial HVAC markets in the US and Asia. Also, further expansion of the partnership with Bosch will be achieved by incorporating Lumada solutions in products.2. Collaborating as One Hitachi to Accelerate the Deployment of Green Cooling Solutions in Growth Markets With the acquisition of the Shimizu Factory, with its high technological capabilities, Hitachi GLS will integrate the development, manufacturing, sales, and maintenance services for the commercial air conditioning business in Japan to develop competitive products tailored to market needs. Also, Hitachi GLS will further enhance its Lumada solutions, such as “exiida*5”, which leverages data from the large installed-base of HVAC units and AI to support the stable operation of air-conditioning units.Hitachi will expand green cooling solutions that combine its extensive installed base of mission critical products with AI-enabled digital services as use cases of “HMAX for Industry” in growing industrial markets such as green buildings, biopharma, food, and semiconductor manufacturing facilities. In addition, Hitachi will accelerate the “One Hitachi” total solutions including air conditioning and cooling technologies in data centers, designated by the Strategic SIB*6 Business Unit as a strategic business area.To ensure continued distribution of “Shirokumakun*7” series residential air conditioning products for the Japanese market, the Tochigi Factory*8 of JCH which was acquired by Bosch HC in the transaction, will retain development and manufacturing operations, while Hitachi GLS will remain responsible for sales and aftermarket services.The purchase price of the 40% stake in JCH held by Hitachi GLS is approximately USD 1.46 billion (approximately JPY 211 billion*9). As a result, Hitachi plans to record business reorganization income, etc. of approximately JPY 154 billion as other income, etc. in its consolidated financial statements for the fiscal year ending March 2026. Please note that the final purchase price will be determined separately after accounting for all necessary adjustments. Hitachi will utilize the proceeds from this share transfer for its growth investments and shareholder returns, aiming to enhance its capital efficiency and further increase corporate value.Comments from Brice Koch — Executive Vice President and Executive Officer, Head of Connective Industries Business of Hitachi, Ltd. We are very pleased to have completed this capital reorganization which will further accelerate the growth of our HVAC business. Under Inspire 2027, Hitachi’s new Management Plan, we are committed to realize a harmonized society, where environment, well being and economic growth are in balance. We aim to drive global expansion of business, as we promote “Lumada 3.0” digital services as “HMAX for Industry” with “One Hitachi”, leveraging our AI capabilities, as well as large installed base of mission-critical products including industrial HVAC units.Comments from Noriharu Amiya — Senior Vice President and Executive Officer, COO of Connective Industries, CEO of Urban Systems Business Unit of Hitachi, Ltd. / Chairman of Hitachi Building Systems Co., Ltd. We will strengthen collaboration between our building systems and air conditioning businesses to expand the value of green cooling solutions into mission-critical areas such as green data centers, biopharmaceutical facilities requiring extremely high air quality, and manufacturing facilities for food and semiconductors, there by achieving further growth. Leveraging Hitachi's strengths in IT, OT (operational technology), and products, we will expand value through the building IoT solutions including the air conditioning IoT solution “exiida” and the building IoT solution “BuilMirai*10,” accelerating the deployment of green cooling solutions with “One Hitachi”. Through these initiatives, we will provide new value to “people, buildings, and society” and contribute to the realization of a harmonized society.Comments from Hideki Osumi — President of Hitachi Global Life Solutions, Inc. We are filled with excitement about taking on new challenges together with our new colleagues from the Shimizu Factory and striving for sustainable growth as the new Hitachi GLS. Hitachi GLS and Bosch will strengthen their partnership and promote the global expansion of Hitachi-branded air conditioning products. In the commercial air conditioning business in Japan, where a new business structure has been established, we will provide high value-added solutions tailored to market needs and contribute to the realization of a sustainable society by reducing environmental impact and improving energy efficiency. We would like to express our deepest gratitude to all those involved in the completion of this reorganization.*1 Please see the news release “Hitachi to Announce Capital Reorganization of Air Conditioning Joint Venture” issued on July 23, 2024. (https://www.hitachi.com/New/cnews/month/2024/07/240723.html)*2 Hitachi GLS and JCI, which held 40% and 60% of JCH shares respectively, sold their entire stake to Bosch, which now owns 100% of JCH.*3 On April 1, 2025, through a company split, the business of the Shimizu Factory was transferred from Hitachi Johnson Controls Air Conditioning, Inc. (the Japanese subsidiary of JCH) to a newly established company, Hitachi Air Conditioning Shimizu, Inc., which will be merged with Hitachi GLS later this year.*4 HVAC stands for Heating, Ventilation, and Air Conditioning.*5 “exiida” is a registered trademark of Hitachi Global Life Solutions, Inc. in Japan.*6 Social Innovation Business*7 “Shirokumakun” is a registered trademark of Hitachi-Johnson Controls Air Conditioning Inc. in Japan.*8 Hitachi-Johnson Controls Air Conditioning, Inc Tochigi Factory, a Japanese subsidiary of JCH. The company’s name is scheduled to change in the future.*9 Exchange rate used is USD 1.00 = JPY 144.*10 “BuilMirai” is a registered trademark of Hitachi, Ltd.About Hitachi, Ltd.Through its Social Innovation Business (SIB) that brings together IT, OT(Operational Technology) and products, Hitachi contributes to a harmonized society where the environment, wellbeing, and economic growth are in balance. Hitachi operates globally in four sectors – Digital Systems & Services, Energy, Mobility, and Connective Industries – and the Strategic SIB Business Unit for new growth businesses. With Lumada at its core, Hitachi generates value from integrating data, technology and domain knowledge to solve customer and social challenges. Revenues for FY2024(ended March 31, 2025) totaled 9,783.3 billion yen, with 618 consolidated subsidiaries and approximately 280,000 employees worldwide. Visit us at www.hitachi.comAbout Hitachi Global Life Solutions, Inc.Hitachi Global Life Solutions, Inc. operates under the purpose:"To bring a smile to the life of each individual. To create a future that is kind to people and society. We will bring happiness to the world through innovations that open up the future."Hitachi GLS provides home appliances, air conditioning equipment, facility systems, as well as engineering and maintenance services. Hitachi GLS is focused on the Lumada business, which creates value from data generated by its footprint and products. Through “One Hitachi”, Hitachi GLS contributes to realizing both Work Transformation and Green Transformation. Visit us at corp.hitachi-gls.co.jp Copyright 2025 JCN Newswire via SeaPRwire.com.

From left to right: Takao Kato, President & CEO of Mitsubishi Motors; Satoshi Nakano, President & CEO of MMFP; Sanjiv Vohra, President & CEO of SBC.MANILA, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Motors Finance Philippines Inc. (hereafter, MMFP), the joint venture between Mitsubishi Motors Corporation (hereafter, Mitsubishi Motors) and Security Bank Corporation (hereafter, Security Bank), officially launched its operations today. Under the brand "Mitsubishi Motors Finance powered by Security Bank," MMFP started operations at five Mitsubishi Motors dealerships in April and now offer financing solutions across all 67 Mitsubishi Motors dealerships nationwide.This nationwide rollout marks a key milestone in Mitsubishi Motors' mid-term business plan, Challenge 2025, which positions ASEAN as a core growth region—with MMFP playing a strategic role in driving that expansion in the Philippines. With a steadily growing population and strong economic fundamentals, the Philippine automotive market is on a clear growth path. In FY2024, Mitsubishi Motors sold 91,639 units locally—a 12% increase year-on-year—cementing the Philippines as one of its top ASEAN markets with 19.5% market share.Driving growth through collaborationWith many new car buyers in the Philippines relying on financing, sales financing plays a critical role in enabling car ownership. By bringing together Mitsubishi Motors' robust market presence and Security Bank's financial expertise, MMFP is committed to driving the continued growth of Mitsubishi Motors' sales in the Philippines."The official launch of MMFP marks a significant milestone in Mitsubishi Motors' long-standing journey in the Philippines," said Takao Kato, President & CEO of Mitsubishi Motors. "We remain committed to the country as one of our most important markets. Through collaboration with MMFP in financing services and Mitsubishi Motors Philippines Corporation in local production and sales, we will continue to grow and serve our customers with excellence.""The official launch of MMFP is a milestone that underscores the strengths of our strategic partnerships— with Mitsubishi Motors and Security Bank." said Sanjiv Vohra, President & CEO of SBC. "We're uniting global expertise with local insight to make car ownership more accessible for Filipinos. Reflecting the Bank's commitment to Better Banking, MMFP delivers innovative, reliable financing solutions that empower customers and elevate their quality of life.""Today marks a key milestone for MMFP as we launch nationwide." said Satoshi Nakano, President & CEO of MMFP. "As a joint venture between Mitsubishi Motors and Security Bank, MMFP brings together market leadership and financial expertise to offer accessible, reliable financing. Our shared vision is to enrich Filipino lives by making car ownership more attainable and supporting Mitsubishi Motors' continued growth in the country."About Mitsubishi Motors Finance Philippines Inc.EstablishmentJanuary 21, 2025President & CEOSatoshi NakanoLocationMakati City, PhilippinesShareholdersMitsubishi Motors Corporation 51%Security Bank Corporation 49%BusinessProvision of financing services and products to Mitsubishi Motors dealerships in the PhilippinesOfficial Websitehttps://mmfp.ph About Mitsubishi Motors CorporationMitsubishi Motors Corporation (TSE:7211) — a member of the Alliance with Renault and Nissan — is a global automobile company based in Tokyo, Japan, which has about 28,000 employees and a global footprint with production facilities in Japan and the ASEAN region. Mitsubishi Motors has a competitive edge in SUVs, pickup trucks and plug-in hybrid electric vehicles, and appeals to ambitious drivers willing to challenge convention and embrace innovation. Since the production of our first vehicle more than a century ago, Mitsubishi Motors has been a leader in electrification — launched the i-MiEV, the world's first mass-produced electric vehicle in 2009, followed by the Outlander PHEV, the world's first plug-in hybrid electric SUV in 2013. With a target of increasing the sales ratio of electrified vehicles to 100% by 2035, Mitsubishi Motors will deliver models that embody Mitsubishi Motors-ness and contribute to the realization of a carbon-neutral society. For more information on Mitsubishi Motors, please visit the company's website at https://www.mitsubishi-motors.com/en/About Security Bank CorporationEstablished in 1951, Security Bank is one of the Philippines' leading universal banks and is publicly listed with the Philippine Stock Exchange (PSE:SECB) in 1995. The Bank's core businesses are retail, corporate, commercial, and business (MSME) banking, offering a wide range of services including lending, leasing, foreign exchange, stock brokerage, investment banking, and asset management.Security Bank differentiates itself from other banks as a strong, domestic, independent bank that delivers a superior customer experience in line with its brand promise of Better Banking. This is based on a deep understanding of customer needs, providing solutions in a professional, hassle-free, personalized, and timely manner. The Bank's strategic alliance with MUFG Bank, Ltd., Japan's largest bank, provides its customers with access to a broad global network.The Bank has been recognized by international and local organizations for its constant product innovation, market leadership, and best-in-class management practices.For more information, visit www.securitybank.com.Security Bank Corporation is regulated by the Bangko Sentral ng Pilipinas www.bsp.gov.ph Copyright 2025 JCN Newswire via SeaPRwire.com.

ISTANBUL, Turkiye, August 1, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Turkiye A.S. (HTR) has decided to establish a new motorcycle factory in Aliaga, izmir, aimed at supporting growth in the motorcycle market and boosting global motorcycle sales.The COVID-19 pandemic has led to an increased demand for personal transportation and commercial use, such as delivery services, driving significant growth in the Turkish motorcycle market. As a result, Honda Turkiye set a new sales record in 2024 with annual sales reaching 162,000 motorcycles.Production is scheduled to begin in mid-2026. Initially, the plant will operate with an annual capacity of 100,000 motorcycles, with plans to increase production capacity to 200,000 units in the future. The total investment amount for the facility including machinery and equipment is approximately 20 million USD. The plant is expected to create employment opportunities for around 300 people.With this new investment, Honda Turkiye aims to strengthen local production activities and contribute to the development of the motorcycle industry in Turkiye by providing high-quality, affordable, and attractive products. About Honda Turkiye A.S.Established :February 1992Headquarter :Maltepe, IstanbulCapital :180 million TLOwnership :Honda Motor Europe Ltd. (100%)President :Satoru YamadaBusiness Activities :Import and sales of motorcycles, automobiles, and partsNumber of Employees :Approximately 160 (as of July 2025) Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Japan, August 1, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Motor Co., Ltd. (Honda) has started a demonstration project jointly with Tokuyama Corporation (Tokuyama) and Mitsubishi Corporation (MC), to operate a data center using by-product hydrogen and a stationary fuel cell (FC) power station designed to reuse FC systems from fuel cell electric vehicles (FCEVs). The companies today held an opening ceremony at the demonstration site located in Shunan City, Yamaguchi Prefecture, Japan. Honda FC power station to be used for this demonstration projectThe three companies have been discussing and preparing for the launch of the demonstration project since June 2023, when this project was proposed to and adopted by the New Energy and Industrial Technology Development Organization (NEDO) as one of the projects for the “Development of Technologies for Realizing a Hydrogen Society / Development of Technologies for Regional Hydrogen Utilization.”In this demonstration project, a stationary FC power station that Honda has developed based on the assumption of reusing fuel cells recovered from FCEVs utilizes by-product hydrogen produced by Tokuyama’s salt water electrolysis business to generate electricity and supply the electricity to a distributed data center operated by MC, at the demonstration site located in Shunan City, Yamaguchi Prefecture, Japan.Through this demonstration project, the three companies will explore the potential of reusing automotive FC systems for stationary FC power station applications, and verify the possibility of contributing to 1) a reduction in the economic burden on customers who will install and operate stationary FC power stations and 2) the decarbonization of electric power, through effective use of FC systems, which are expected to see broader adoption in the future.A further increase in power demand for data centers is expected in the long run due to the advancement of technologies that require large-volume data processing, such as generative AI and automated driving. In the face of this market environment, by utilizing 1) by-product hydrogen, which can be produced/supplied stably with low carbon emissions, and 2) FCs designed to be reused, to supply electricity to distributed data centers, the three companies will strive to contribute to the “green transformation” (GX) of data centers and the digital transformation (DX) of municipalities and local businesses. Multiple patterns of power supply operations to be demonstratedIn this demonstration, electricity from multiple sources, such as 1) a stationary FC power station that utilizes by-product hydrogen, 2) the power grid, 3) stationary batteries (BESS*¹), and 4) renewable energy sources will be combined to verify more efficient and optimal power configuration for different patterns of operation.The following specific patterns of stationary FC power station utilization, based on various possible scenarios, will be demonstrated by switching among these operation patterns via an Energy Management System (EMS):1) Use as a backup power source2) Use as an off-grid primary power s1ource3) Use for peak shaving of grid electricity consumption4) Use for grid supply-demand balancing, including supplying electricity back to the gridIn addition to verifying the practicality and business viability of stationary FC power station operation, a wide range of potential applications will be explored through this demonstration project. *1 BESS: Battery Energy Storage System*2 Peak shaving: Reducing electricity consumption during peak demand periodsAbout Honda Stationary Fuel Cell Power StationHonda was one of the first companies to focus on the potential of hydrogen toward the realization of a carbon-neutral society and has been conducting research and development of hydrogen technologies and FCEVs for more than 30 years. Working toward the realization of carbon neutrality for all products and corporate activities Honda is involved in by 2050, Honda has identified four core domains for its fuel cell system application – fuel cell electric vehicles (FCEVs), commercial vehicles, stationary power station and construction machinery – and has been working to further expand opportunities for its hydrogen business.The Honda stationary FC power station is a stationary power storage system designed to supply clean, hydrogen-derived electricity to large-scale facilities such as factories and other business operations. The stationary FC power station being used in this demonstration project utilizes fuel cells used for a Honda CR-V e:FCEV fuel cell electric vehicle.The Honda stationary FC power station is capable of supplying electricity to meet the maximum amount of electricity consumption by the customer in accordance with their needs. Moreover, the compact size of the unit achieved by the optimization of the cooling system and internal layout enables flexible installation options to accommodate the conditions of the customer’s installation site. In addition, the Honda stationary FC power station is designed to achieve high responsiveness, aiming to begin power supply within 10 seconds of startup, to serve as a reliable backup power source in case of an emergency.Through its stationary FC power station, Honda will supply electricity that accommodates the various power needs of customers, while also contributing to the decarbonization efforts of each customer by providing comprehensive support for the entire process—from installation to after-sales services. For more details, please visit:https://global.honda/content/dam/site/global-en/newsroom-new/cq_img/news/2025/08/c250801aeng/c250801aeng.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

KARIYA, JAPAN, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - BluE Nexus Corporation (headquartered in Anjo, Aichi; Hidetoshi Uchiyama, president; hereinafter “BluE”), AISIN Corporation (headquartered in Kariya, Aichi; Moritaka Yoshida, president; hereinafter “AISIN”), and DENSO CORPORATION (headquartered in Kariya, Aichi; Shinnosuke Hayashi, president; hereinafter “DENSO”) are proud to announce that, the eAxle jointly developed by the three companies has been installed in Isuzu's first battery electric vehicle (BEV) pickup, D-MAX EV, which went into production in April 2025.The newly installed product combines the newly developed eAxle front and rear with a full-time *4WD system, contributing to both the tough basic performance required for pickup trucks (durability/loading and towing performance/rugged road drivability) and the linear acceleration and low noise and vibration characteristic of BEVs. The BEV is a 4WD system with a low-noise and low-vibration engine.As D-MAX EVs are gradually expanded globally, starting with shipments to major European countries and gradually adapting to market characteristics and customer needs, this product will also provide high-performance drive solutions around the world.Going forward, BluE, AISIN, and DENSO will continue to provide valuable technologies and products by leveraging their respective strengths and know-how. In addition, through BluE, we will contribute to the realization of a carbon-neutral society by having our products installed in all types of electric vehicles.*Full-time 4WD is a drive system that transmits power to both the front and rear wheels at all times, regardless of road conditions, including off-road and on-road driving.About BluE Nexus,“BluE”BluE is an electrification system and electric drive module development and sales company established in April 2019. BluE aims to meet the needs of customers worldwide and contribute to the further development and popularization of electrified vehicles and the realization of carbon neutrality in society.About DENSO CORPORATIONGlobally headquartered in Kariya, Japan, DENSO is a 7,161.8 billion yen leading mobility supplier that develops advanced technology and components for nearly every vehicle make and model on the road today. With manufacturing at its core, DENSO invests in around 180 facilities worldwide to provide opportunities for rewarding careers and to produce cutting-edge electrification, powertrain, thermal and mobility electronics products, among others, that change how the world moves. In developing such solutions, the company’s 158,000 global employees are paving the way to a mobility future that improves lives, eliminates traffic accidents, and preserves the environment. DENSO spent around 8.6 percent of its global consolidated sales on research and development in the fiscal year ending March 31, 2025. For more information about DENSO’s operations worldwide, visit https://www.denso.com/global Copyright 2025 JCN Newswire via SeaPRwire.com.

Kawasaki, Japan, August 1, 2025 - (JCN Newswire via SeaPRwire.com) - Fujitsu today announced that it has started research and development towards a superconducting quantum computer with a capacity exceeding 10,000 qubits. Construction is slated for completion in fiscal 2030.The new superconducting quantum computer will operate with 250 logical qubits and will utilize Fujitsu's innovative "STAR architecture," an early-stage fault-tolerant quantum computing (early-FTQC) architecture also developed by the company. Fujitsu aims to make practical quantum computing possible, particularly in areas like materials science where complex simulations can unlock ground breaking discoveries, and to this end will focus on advancing key scaling technologies across various technical domains.As part of this effort, Fujitsu has been selected as an implementing party for the "Research and Development Project of the Enhanced Infrastructures for Post-5G Information and Communication Systems" [1], publicly solicited by the NEDO (New Energy and Industrial Technology Development Organization). Fujitsu will be contributing to the thematic area of advancing the development of quantum computers towards industrialization. The project will be promoted through joint research with Japan’s National Institute of Advanced Industrial Science and Technology (AIST) and RIKEN, and will run until fiscal year 2027.Fujitsu is committed to driving forward the development of practical and industrialized quantum computing solutions. After this 10,000-qubit machine is built, Fujitsu will further pursue advanced research initiatives targeting the integration of superconducting and diamond spin-based qubits from fiscal 2030 and aims to realize a 1,000 logical qubit machine in fiscal 2035 while considering the possibility of multiple interconnected quantum bit-chips.Vivek Mahajan, Corporate Executive Officer, Corporate Vice President, CTO, in charge of System Platform, Fujitsu Limited, comments:"Fujitsu is already recognized as a world leader in quantum computing across a broad spectrum, from software to hardware. This project, led by NEDO, will contribute significantly to Fujitsu’s goal of further developing a Made-in-Japan fault tolerant superconducting quantum computer. We would also be aiming to combine superconducting quantum computing with diamond spin technology as part of our roadmap. By realizing 250 logical qubits in fiscal 2030 and 1,000 logical qubits in fiscal 2035, Fujitsu is committed to leading the path forward globally in the field of quantum computing. Additionally, Fujitsu will be developing the next generation of its HPC platform, using its FUJITSU-MONAKA processor line, which will also power FugakuNEXT. Fujitsu will further integrate its platforms for high-performance and quantum computing to offer a comprehensive computing platform to our customers."Technology development focus areasFujitsu’s research efforts will focus on developing the following scaling technologies.1. High-throughput, high-precision qubit manufacturing technology:Improvement of the manufacturing precision of Josephson Junctions, critical components of superconducting qubits which minimize frequency variations.2. Chip-to-chip interconnect technology:Development of wiring and packaging technologies to enable the interconnection of multiple qubit chips, facilitating the creation of larger quantum processors.3. High-density packaging and low-cost qubit control:Addressing the challenges associated with cryogenic cooling and control systems, including the development of techniques to reduce component count and heat dissipation.4. Decoding technology for quantum error correction:Development of algorithms and system designs for decoding measurement data and correcting errors in quantum computations.BackgroundThe world faces increasingly complex challenges that demand computational power beyond the reach of traditional computers. Quantum computers offer the promise of tackling these previously intractable problems, driving significant advancements across numerous fields. While a fully fault-tolerant quantum computer with 1 million qubits of processing power is considered the ultimate goal, Fujitsu is focused on delivering practical solutions in the near term.Fujitsu's commitment to quantum computing is underscored by its ongoing R&D efforts. In August 2024, in collaboration with the University of Osaka, Fujitsu unveiled its STAR architecture, a highly efficient quantum computing architecture based on phase rotation gates. This architecture paves the way for early-FTQC systems capable of outperforming conventional computers with only 60,000 qubits [2]. On the hardware front, the RIKEN RQC-Fujitsu Collaboration Center, established in 2021 with RIKEN, has already yielded a 64-qubit superconducting quantum computer in October 2023, followed by a world-leading 256-qubit system in April 2025 [3].Scaling to even larger systems requires overcoming challenges such as maintaining high fidelity across multiple interconnected qubit chips and achieving greater integration of components and wiring within dilution refrigerators. In addition to its superconducting approach, Fujitsu is also exploring the potential of diamond spin-based qubits, which use light for qubit connectivity. Fujitsu is conducting research in this area in collaboration with Delft University of Technology and QuTech, a leading quantum technology research institute, which has resulted in the successful creation of highly accurate and controllable qubits.[1] Research and Development Project of the Enhanced Infrastructures for Post-5G Information and Communication Systems[2] In simulations using 60,000 qubits, the STAR architecture can execute material energy estimation calculations which would take 5 years on conventional computers in about 10 hours.[3] One of the world's largest superconducting quantum computers available to external users (as of April 2025, according to Fujitsu).About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers around the globe, our 113,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: AI, Computing, Networks, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.6 trillion yen (US$23 billion) for the fiscal year ended March 31, 2025 and remains the top digital services company in Japan by market share. Find out more: global.fujitsuPress ContactsFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, July 31, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that the global revenue(pre-audit basis) of the anti-amyloid-beta protofibril antibody “LEQEMBI®” (generic name: lecanemab) was JPY 23.1 billion for the first quarter of fiscal year 2025 (April 1, 2025 – June 30, 2025). By major markets, revenue came to JPY 9.1 billion in the United States, JPY 5.5 billion in Japan, and JPY 7.7 billion in Chinadue to increasing demand and stock piling by distributors (estimated at JPY 5.3 billion) in response to the risk of tariffs. This information is being disclosed in conjunction with today's announcement of the financial results for the second quarter of 2025 by Biogen Inc. (Headquarters: Cambridge, Massachusetts). Eisai’s financial results for the first quarter of fiscal year 2025, including details of LEQEMBI’s revenue, will be disclosed in Eisai's financial disclosure scheduled for August 5, 2025.Eisai serves as the lead of lecanemab development and regulatory submissions globally with both Eisai and Biogen Inc. co-commercializing and co-promoting the product and Eisai having final decision-making authority. Copyright 2025 JCN Newswire via SeaPRwire.com.

Takamatsu, Kagawa, July 23, 2025 - (JCN Newswire via SeaPRwire.com) - Sharp reached an agreement with Aoi Electronics Co., Ltd. (Headquarters / Takamatsu City, Kagawa Prefecture, President & CEO / Kazuhiro Kinoshita; hereinafter "Aoi Electronics") on the transfer of Sharp Mie Plant No.2 and part of the land at Sharp Mie Base.Under its asset-light initiative in devices business and to transfer its structure centering its Brand business, Sharp is promoting the utilization of underutilized and unused factories, as well as business development through collaboration with other companies. This agreement is part of such initiative and corresponds to the consideration of transferring the Mie Plant No.2 mentioned in the news release dated March 31, 2025.Through Sharp Display Technology Corporation, Sharp’s subsidiary in charge of small and medium size LCD business, Sharp will collaborate with Aoi Electronics on the early start-up of their production line in the factories they bought.*Property for Transfer(1) Sharp Mie Plant No. 2 (Building)・Location: Gosana, Taki-cho, Taki-gun, Mie Prefecture・Total Floor Area: Approx. 54,000 square meters (including production area: approx. 20,000 square meters)・Contract Date/ Delivery Date: July 31, 2025(2) Land ・Location: Gosana, Taki-cho, Taki-gun, Mie Prefecture・Land Area: Approx. 58,000 square meters (Land for Sharp Mie Plant No.1 and No.2)・Contract Date: July 31, 2025・Delivery Date: End of December, 2025 (plan) Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, July 31, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA PRECIOUS METAL GROUP Co., Ltd. (Headquarters: Chuo-ku, Tokyo; Group CEO: Koichiro Tanaka) has decided to enter into a business partnership with JEPLAN, INC. (Headquarters: Kawasaki City, Kanagawa; Representative Director, President, and Chief Executive Officer: Masaki Takao; hereinafter “JEPLAN”) to reduce CO₂ emissions and promote the recycling organic materials in the precious metal recovery processes of TANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd., a company engaged in precious metals business.This initiative represents a collaboration between TANAKA, committed to advancing a circular economy in the precious metals field, and JEPLAN, which has been pursuing similar goals in the plastics field, with both companies aiming to achieve a decarbonized, circular society.TANAKA’s Initiatives Thus Far for Realizing a Circular SocietySince its founding in 1885, TANAKA has been a leader in the precious metals industry, actively engaged in recycling these limited and valuable resources. Among the process waste materials received from customers who request recycling, those containing organic materials (plastics) as main components with precious metals attached or adsorbed have traditionally been processed through incineration to remove the organic materials, with precious metals then recovered from the ash left behind.While this incineration process has addressed the removal of environmentally regulated substances, the reduction of CO₂ generated during the combustion of organic materials has become a major challenge in realizing a decarbonized society.Transforming the Precious Metal Recovery Process Through a Business Partnership with JEPLANJEPLAN has established proprietary chemical recycling technology for polyethylene terephthalate, a type of plastic. To address the aforementioned CO₂ emissions issue, TANAKA is considering using chemical recycling in the future, in addition to the conventional precious metal recovery process through incineration. This initiative is being explored through a business partnership with JEPLAN. The materials targeted for chemical processing include plastics such as syringes and wiping cloths. CO₂ emissions from the targeted precious metal recovery process are expected to be reduced to approximately 10% of conventional levels.In addition, this process enables not only precious metal recovery, but also plastic regeneration, with TANAKA and JEPLAN each contributing to the realization of a decarbonized, circular society through their respective areas of expertise.JEPLAN, INC. ( https://www.jeplan.co.jp/en/ )Representative: Masaki Takao, Representative Director, President, and Chief Executive OfficerEstablished: January 2007Main Business: Business based and related to PET chemical recycling technology (for PET bottles, polyester), etc.The JEPLAN Group aims to realize a circular economy with its mission of "We circulate our world." We use our proprietary PET chemical recycling technology to break down waste PET (PET bottles, polyester fibers, etc.) into molecules and remove impurities, regenerating it into recycled materials of the same quality as petroleum-derived materials. Through our recycling efforts using this proprietary technology, we are realizing the recycling of limited resources and contributing to the reduction of CO₂ emissions.The JEPLAN Group operates PET chemical recycling plants at two locations, PET REFINE TECHNOLOGY CO., LTD. (Kawasaki City, Kanagawa Prefecture, for PET bottles) and Kitakyushu Hibikinada Plant (Kitakyushu City, Fukuoka Prefecture, for polyester fibers), and is also promoting technology licensing in Japan and overseas.About TANAKASince its foundation in 1885, TANAKA has built a portfolio of products to support a diversified range of business uses focused on precious metals. TANAKA is a leader in Japan regarding the volume of precious metals it handles. Over many years, TANAKA has manufactured and sold precious metal products for industry and provided precious metals in such forms as jewelry and assets. As precious metals specialists, all Group companies in Japan and worldwide collaborate on manufacturing, sales, and technology development to offer a full range of products and services. With 5,591 employees, the group’s consolidated net sales for the fiscal year ending December 2024, was 846.9 billion yen.TANAKA Industrial Precious Metal Materials Portalhttps://tanaka-preciousmetals.comProduct inquiriesTANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd.https://tanaka-preciousmetals.com/en/inquiries-on-industrial-products/Press inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://tanaka-preciousmetals.com/en/inquiries-for-media/Press release: https://www.acnnewswire.com/docs/files/20250731.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOYOTA CITY, July 30, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Motor Corporation announces its sales, production, and export results for June 2025 as well as the cumulative total from January to June 2025, including those for subsidiaries Daihatsu Motor Co., Ltd. and Hino Motors, Ltd.For more details, please see the link below (detailed data).Click here for detailed sales, production, and export results ("Detailed data (Excel)")URL https://global.toyota/en/company/profile/production-sales-figures/202506.html Copyright 2025 JCN Newswire via SeaPRwire.com.

Santa Clara, CA, July 29, 2025, (ACN Newswire via SeaPRwire.com) - Meshy.ai, the world’s leading AI-powered 3D content generation platform, has launched the Meshy 5 Preview, offering early access to the next generation of AI 3D model generator. Built on the strong foundation of Meshy 4, this preview version introduces smarter generation tools, enhanced image alignment, sharper geometry, and over 500 new animations—empowering creators to build faster, cleaner, and more creatively than ever before.Trusted by 3 Million Creators – The Platform of Choice for Game DevelopersWith over 30 million 3D assets generated and a community of more than 3 million creators, Meshy has become the go-to AI platform for game developers, VFX artists, and 3D content professionals worldwide. Recognized by Andreessen Horowitz (a16z) as the only 3D tool featured in its list of “Most Popular AI Tools Among Game Developers,” Meshy is redefining how digital worlds are built—with speed, accuracy, and creative control.What’s New in Meshy 5 PreviewStronger Image Alignment: Mesh structures now more precisely match the shape and proportions of input images — with support for multi-view input to generate more complete 3D models.Razor-sharp Geometry: From hard-surface mechs to organic characters, edges are sharper and forms more defined.Advanced AI Tools: Now supports Kontext for multi-view generation and a smart AI Prompt Helper to make prompting faster and easier.500+ New Animations: A dramatically expanded animation library for rigged characters, empowering developers and artists with more expressive motion capabilities.“The multi-view support and sharper geometry have made our modelling workflow twice as fast with much less cleanup,” said Victoria C., a senior 3D environment artist at an indie game studio and early Meshy 5 Preview tester. “This version brings us much closer to using AI directly in our production pipeline.”From Meshy 4 to Meshy 5 Preview: A Foundation ReinforcedAbout one year ago, Meshy introduced Meshy 4, which brought improvements in geometry quality, Text to 3D workflow, and retry functionality. Meshy 5 Preview builds on that foundation, offering enhanced mesh coherence, fewer visual defects, and a more structured modelling-to-texturing pipeline—allowing creators to move from concept to completion with unprecedented speed and clarity.Whether generating stylized concepts or rigged production assets, Meshy empowers studios to accelerate creative pipelines, reduce manual workloads, and retain full artistic control. The platform integrates seamlessly with tools like Unity, Unreal Engine, Blender, and ZBrush, and supports advanced rigging and animation workflows out-of-the-box.What Sets Meshy ApartPowered by cutting-edge foundation models, Meshy combines advanced AI technology with industry-leading product capabilities to deliver unparalleled value. Its unique features and user-centric design have established Meshy as the world’s leading AI 3D model generator. Key differentiators include:Hyper-Realistic Texture Generation – Capable of producing highly detailed, natural-looking textures that align with industry standards.Advanced Rigging and Animation Support – Offers ready-to-use rigged models alongside an expanding motion library, significantly streamlining animation workflows.A Thriving Community for Remix & Creative Collaboration – Hosts a vast repository of high-quality, customizable assets, enabling creators to easily remix and build upon existing work.Unmatched Workflow Flexibility – Supports both white and textured model outputs, along with texture swapping via text or images. Artists can effortlessly re-style assets — for example, transforming a realistic model into an ink-wash aesthetic — without starting from scratch.Real Creators. Real Workflows. Real Impact.From indie game developers and VFX artists to educators and avatar designers, creators around the world are embracing Meshy 5 Preview to reimagine the way they build, teach, and tell stories in 3D. Whether it’s speeding up asset production, unlocking new creative directions, or making 3D design accessible to more people—Meshy is becoming a core part of real-world workflows.Explore how Meshy is powering next-gen creativity—one creator at a time.Sivan Okcu – Avatar Creator for Second LifeUses Meshy’s Text to 3D and Image to 3D features to produce stylized avatars faster, reduce costs, and grow his virtual business.“I can explore more styles, lower prices, and sell more—all without sacrificing quality.” Read Sivan’s story → Skylyfe Inc. – Tech Education for Underserved YouthEmpowers students aged 10–30 with hands-on 3D design using Meshy in an 8-week program focused on 3D printing, AR, and VR.“Students said it felt like printing things from your mind into real life.”Read the Skylyfe story → Marcos Medel – VFX Artist & AnimatorTransforms classical paintings into surreal 3D cinematic loops using Meshy to create custom models with AI-enhanced workflows.“Something that could take days or weeks — Meshy can do in just a few clicks.” Read Marcos’s story → David Zhang – Indie Game Developer (Remnants of R’lyeh) Builds weapons, creatures, and deep-sea props using Meshy’s Text-to-3D, accelerating production and enriching a Lovecraft-inspired horror world.“Meshy helped bring my game’s vision to life—faster, cheaper, and more creatively.” Read David’s story → Read More User Stories in the Meshy BlogWhether you’re a creator with a cool workflow or an influencer interested in collaborating, share your project with us at marketing@meshy.ai.Media Contact: Conan Zhang, Meshy.ai, marketing@meshy.ai, www.meshy.ai Distributed by Pinion Newswire. All rights reserved. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, July 30, 2025 - (JCN Newswire via SeaPRwire.com) - Sharp Corporation has reached an agreement with Mitsubishi Chemical Corporation (Headquarters: Chiyoda-ku, Tokyo; President: Manabu Tsukimoto), the National Institute of Information and Communications Technology (NICT) (Headquarters: Koganei City, Tokyo; President: Hideyuki Tokuda), and TECHLAB Co., Ltd. (Headquarters: Tama City, Tokyo; President: Hiroshi Hatakeyama) to collaboratively develop ultra-compact and lightweight LEO (Low Earth Orbit) satellite communication user terminals for mobility applications.Left: Ultra-Compact and Lightweight LEO Satellite Communication User Terminal;Right: An Image of the Terminal Installed in a VehicleLEO satellite communication enables high-quality, high-speed connectivity even in challenging environments such as mountainous regions, at sea, and on remote islands. Sharp began developing LEO satellite communication user terminals in 2023 (*2), applying design and communication technologies honed through smartphone development to create a compact model (approximately 446 x 446 x 66mm) weighing around 7kg. The goal of this agreement is to accelerate efforts towards practical implementation by fiscal 2025, targeting deployment on vessels and other platforms.With this new agreement, the development of even smaller and lighter LEO satellite communication user terminals will commence in collaboration with Mitsubishi Chemical, NICT, and TECHLAB. A form factor about one-tenth the size (approximately 200 x 200 x 30mm and 1kg) of the currently developed terminal will be aimed through the development of lightweight, high thermal conductivity composite materials and superior heat dissipation designs. By enabling deployment on mobility platforms such as drones and vehicles, applications of LEO satellite communication will be significantly expanded, ensuring communication lines in mountainous areas and disaster zones, enabling real-time location data transmission, and facilitating usage in autonomous vehicles.This initiative will be showcased at the Sharp booth (*2) (South Exhibition Hall, Satellite Data and Space Utilization Area S6-34) and at the Mitsubishi Chemical booth (S7-11) during the "SPEXA - [International] Space Business Exhibition 2025," held at Tokyo Big Sight (Koto-ku, Tokyo) from July 30 (Wednesday) to August 1 (Friday).Roles of Parties Involved- Sharp: Development of LEO satellite communication user terminals utilizing miniaturization and communication technologies cultivated in smartphone design.- Mitsubishi Chemical: Development of new lightweight, high thermal conductivity composite materials for heat dissipation plates.- NICT: Overall design and simulation of antennas for ultra-miniaturization and lightweight structures, including heat dissipation designs.- TECHLAB: Material molding and processing of new materials.Contacts:NTN_B5G@sharp.co.jp*1 This terminal integrates LEO satellite communication antennas and modem functions. LEO stands for Low Earth Orbit.*2 The development of LEO satellite communication user terminals and participation in SPEXA is supported by a grant from the National Institute of Information and Communications Technology (NICT). (JPJ012368G50501) Copyright 2025 JCN Newswire via SeaPRwire.com.

Mitsubishi Heavy Industries aims to integrate DCIM (Data Center Infrastructure Management) into its One-stop solutions portfolio to offer digital services to data centersThe combination delivers a comprehensive view of data center infrastructure, enabling enhanced visibility, elevated operational efficiency and optimized energy consumptionTOKYO, July 29, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Heavy Industries, Ltd. (MHI) has concluded an agreement with Modius® Inc., a US based provider of innovative software solutions for managing critical facilities for the data center and telecommunications markets. Under this agreement, MHI will integrate Modius's OpenData® DCIM technology with MHI's power, cooling, and control technologies to deliver a unique, market leading solution for Data Center Energy Management (DCEM). This collaboration is an example of MHI Group's partnering efforts, and MHI Group will continue to build strategic partnerships globally.Modius's OpenData DCIM platform provides real-time insights into data center infrastructure, enabling capacity management, improved uptime and enhanced energy efficiency. With over 250 deployments worldwide, Modius has gained customer trust for delivering reliable and sustainable solutions that optimize operations and reduce environmental impact.With rapid scaling of digital infrastructure globally and frequent upgrades to IT systems, it is becoming an overwhelming challenge to manage the reliable operation of data centers while also being energy efficient. The OpenData® AI/ML module strengthens MHI's One-stop Solutions Portfolio by enabling real-time anomaly detection and proactive diagnostics. By self-learning the "normal" behavior of data centers, the AI system empowers operators to address issues before they escalate. By combining Modius's real time monitoring and AI/ML driven analytics with MHI's cutting-edge engineering solutions, the joint offering will empower customers to proactively manage capacity, minimize downtime, and improve sustainability."MHI is committed to delivering sustainable and energy efficient data center solutions," said Shin Gomi, Senior General Manager, DCEM at MHI. "With the addition of the Modius DCIM platform to our digital solution portfolio, we can offer digital services to both existing and new customers seeking enhanced visibility and optimization for building next-generation data centers.""MHI's global presence and its alignment with our mission to drive efficiency, improve sustainability, and optimize performance in data centers make this collaboration a perfect fit," said Craig Compiano, President at Modius. "We are excited to work with MHI to deliver our DCIM solutions alongside their advanced technologies to customers worldwide.Mitsubishi Heavy Industries Group is delivering more sustainable and reliable solutions to data centers by combining decarbonized power generation, reliable power distribution, high efficiency cooling systems and Integrated Digital Solutions. We support our customers through the complete lifecycle from design phase to post deployment with actionable insights, solutions and services.About ModiusModius Inc. is a leading innovator in Data Center Infrastructure Management (DCIM) solutions, providing real-time visibility and decision support for managing distributed equipment across data centers, telecommunications networks, and other critical facilities. The company's flagship product, OpenData, is an edge-ready asset performance management platform designed to optimize the availability, capacity, and efficiency of critical infrastructure. For more information about Modius Inc. and the OpenData platform, please visit Modius.comAbout MHI GroupMitsubishi Heavy Industries (MHI) Group is one of the world’s leading industrial groups, spanning energy, smart infrastructure, industrial machinery, aerospace and defense. MHI Group combines cutting-edge technology with deep experience to deliver innovative, integrated solutions that help to realize a carbon neutral world, improve the quality of life and ensure a safer world. For more information, please visit www.mhi.com or follow our insights and stories on spectra.mhi.com Copyright 2025 JCN Newswire via SeaPRwire.com.

Osaka, Japan, July 29, 2025 - (JCN Newswire via SeaPRwire.com) - Osaka Prefecture has finalized the detailed program for the OSAKA JAPAN SDGs Forum to be held on Friday, September 5, 2025.Under the Osaka SDGs Vision (formulated in 2020), Osaka Prefecture has set the goal of becoming a leading “SDGs advanced city” that contributes to achieving the SDGs on a global scale as the host city of the Osaka-Kansai Expo. To achieve this, Osaka is working collectively to create new SDGs initiatives. As part of these efforts, the OSAKA JAPAN SDGs Forum will be held at the Expo Hall “Shine Hat” located within the Osaka-Kansai Expo venue. This forum, traditionally organized as the National SDGs Forum by various local governments, will now take place at the Expo venue under the theme “EXPO for SDGs.” Its aim is to share pioneering actions with domestic and international audiences and to encourage all participants to think together about the future beyond 2030, “SDGs + beyond.” The forum’s concept, “Connecting Everyone’s Wisdom to Change the World,” will bring together diverse stakeholders, including SDGs experts from the United Nations, private companies and local governments committed to SDGs, as well as members of the youth generation, breaking down barriers to collaborate toward a sustainable future.The opening address will be delivered by Osaka Governor Hirofumi Yoshimura, and the keynote speech will be given by Professor Norichika Kanie, a leading authority on SDGs and one of 15 independent scientists appointed by the UN Secretary-General to contribute to the Global Sustainable Development Report (GSDR 2023). In addition, Ryoko Aoyagi, Country President of Schneider Electric Japan, will deliver a special lecture. Schneider Electric has been recognized as the world’s most sustainable company for two consecutive years by TIME Magazine and Statista, and is renowned for its pioneering initiatives in advancing the SDGs.The panel discussion will feature Toshihiro Michioka, Representative Director and Deputy President of Sumitomo Mitsui Banking Corporation, Ryuichi Kouno, Managing Director of Mandai Co., Ltd., and Yasumi Takahashi, Executive Officer and Head of SCM at Ezaki Glico Co., Ltd. The session will be moderated by Tsutomu Sasaki, Chief Specialist at the Japan Research Institute, Ltd. The discussion will focus on the “Genkotsu Project,” a collaborative initiative by Osaka Prefecture and private companies aimed at promoting consumer behavior change toward decarbonization, along with the specific actions that government, industry, and the public can take. In addition, the program will feature a performance by Mitsuko Nakamura, an enka singer who has long supported assistance dogs-related initiatives.The forum will conclude with a panel discussion featuring Toshihiko Ota, Mayor of Toyota City, the next host city of this forum, Yumi Otsuka, Chief Sustainability Officer for Toyota Motor Corporation, and Professor Norichika Kanie.We invite companies, local governments, NGOs, and students who are interested in the SDGs to join us.Please see this link for details: OSAKA JAPAN SDGs ForumOverview1. Date and Time: 13:00 to 17:30, Friday, September 5, 2025 (venue opens at 12:00)2. Venue: Expo Hall “Shine Hat” (inside the Osaka-Kansai Expo site)3. Eligible Participants: Students, academics, and groups such as corporations, local authorities, or NPOs interested in the SDGs4. Capacity and Participation Fee: 1,300 personsParticipation Fee: Free (*please note that a separate ticket is required for entry to the Expo site)5. Program (Tentative): *This is the current plan, but please note that the program is subject to change.PROGRAMSpeakers/OverviewPart 1: 13:00 to 15:15Opening Ceremony- DAZZLE Dance Company- BOTAN Dance Unit- Approx. 70 people, including disabled persons, selected through open recruitmentThey will put on a dance performance entitled “Hikari Musubi”Greetings from HostOsaka Governor Hirofumi YoshimuraGreetings from GuestsUnited Nations agencies and othersKeynote SpeechDr. Norichika Kanie, Deputy Director Keio STAR, Head of the SFC Laboratory xSDG Laboratory, Professor at the Graduate School of Media and Governance of Keio UniversityWe will welcome Professor Norichika Kanie of Keio University, a leading researcher in SDGs in Japan, and one of the 15 independent scholars appointed by the Secretary-General of the United NationsSpeechRyoko Aoyagi, Country President of Schneider Electric JapanRyoko Aoyagi, Country President of Schneider Electric Japan, a company ranked No.1 for two consecutive years in TIME Magazine’s "World’s Most Sustainable Companies 2025," is confirmed to speak at the eventPanel Discussion- Toshihiro Michioka, Representative Director and Deputy President of Sumitomo Mitsui Banking Corporation- Ryuichi Kouno, Managing Director of Mandai Co., Ltd.- Yasumi Takahashi, Executive Officer and Head of SCM at Ezaki Glico Co., Ltd.- Koji Harada, Manager, Department of Environment, Agriculture, Forestry and Fisheries, Osaka Prefecture- Moderator: Tsutomu Sasaki, Chief Specialist, The Japan Research Institute, Ltd.Osaka Prefecture and private companies participating in the “Genkotsu” CO2 Reduction Project, which aims to promote consumer behavioral changes for decarbonization, will share insights on what industry, government, and citizens, can doBreakPart 2: 15:25 to 17:30 (target)Resumed ContentEnka singer Mitsuko NakamuraPerformance by Mitsuko Nakamura, and awareness-raising about assistance dogsSpeechDr. Shun Kawakubo, Associate Professor, Faculty of Science and Technology, Keio University, and Member of the Osaka Prefecture SDGs Experts CommitteeFollowing an introduction of the results of a data analysis of Osaka Prefecture's "My SDGs Declaration Project," Dr. Kawakubo will present hints for further accelerating future actions towards achieving the SDGsPresentationStudents from Kansai University Hokuyo Senior High School, Yamawaki Gakuen Senior High School, and othersMessage from the youth generationPresentations from the winning teams from the "6th Kansai SDGs Youth Action 2024," a program recognizing students' ideas and actions toward achieving the SDGsPanel Discussion- Toshihiko Ota, Toyota City Mayor- Yumi Otsuka, Chief Sustainability Officer for Toyota Motor Corporation- Professor Norichika KanieSpecial content about the city of Toyota, which will be the next host city for the SDGs National Forum. A panel discussion will be held on the theme of SDGs and partnerships.Closing Ceremony Profiles of SpeakersKeynote SpeechNorichika KanieProfessor at the Graduate School of Media and Governance, Keio University Director, xSDG Laboratory, Keio Research Institute at SFC Deputy Director, Keio STARSpecializing in international relations, sustainability studies, and earth system governance, Professor Kanie is one of 15 independent scientists appointed by the UN Secretary-General to contribute to the Global Sustainable Development Report (GSDR 2023). He also serves as a member of the Japanese Government’s SDGs Promotion Headquarters Roundtable, an Earth Commission Ambassador, and actively engages in international and domestic research and policy initiatives related to SDGs and global environmental issues. Holds a Ph.D. in Policy and Media.SpeechRyoko AoyagiCountry President, Schneider Electric JapanProfileJoined Schneider Electric in August 2018 as Vice President of the Power Systems Division. In May 2021, she was appointed Vice President of the Services Division. Expanding her responsibilities further, in April 2024, she also took on the role of Vice President for the Energy Management Segment Division, overseeing energy management business strategies for key focus industries. On October 1, 2024, she assumed the position of Country President of Schneider Electric Japan, where she is responsible for all of Schneider Electric’s operations in the Japanese market, including affiliated companies and joint ventures. Concurrently, she was appointed Representative Director of Schneider Electric Japan, Inc. and Schneider Electric Holdings K.K.6. How to ApplyRegistration for the forum is now open. For details, please refer to this link: OSAKA JAPAN SDGs ForumPlease note that, in addition to registering for the forum, visitors who already have an Osaka-Kansai Expo admission ticket must reserve their entry date and time for Friday, September 5, 2025, via the EXPO 2025 Digital Ticket website. Those who do not have a ticket will need to purchase one.REFERENCE: About the SDGsThe Sustainable Development Goals (SDGs) are an international agenda unanimously adopted at the United Nations Summit in September 2015.They consist of 17 global goals and 169 associated targets to be achieved by 2030, aimed at realizing a sustainable society that is inclusive and leaves no one behind.The SDGs are universal goals that not only developing countries but also developed nations must work toward, requiring the involvement of various stakeholders, including local governments.In Osaka Prefecture, initiatives are being promoted to become a leading city for SDGs based on the “Osaka SDGs Vision” formulated in March 2020.Reference: Osaka SDGs Vision: The image of an “SDGs advanced city” that Osaka strives to achieve https://www.pref.osaka.lg.jp/documents/12984/osaka20sdgs20vision~20230409.pdf Reference link: OSAKA JAPAN SDGs ForumInquiries about this matterOSAKA JAPAN SDGs Forum PR OfficeKyodo PR Co., Ltd. E-mail: sdgs-forum-pr@kyodo-pr.co.jp*Information about entering the event or reporting will be provided to members of the press separately.AD certificates will not be issued by the hosts. Please contact the 2025 Japan Expo Public Relations Office for AD certificate issue.Press release: https://www.acnnewswire.com/docs/files/2025729.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, July 29, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that its in-house discovered tyrosine kinase inhibitor, “LENVIMA®” (generic name: lenvatinib mesylate), in combination with the anti-PD-1 antibody, pembrolizumab, and transarterial chemoembolization (TACE) has been approved by the National Medical Products Administration (NMPA) of China for unresectable, non-metastatic hepatocellular carcinoma.This approval is based on interim analysis results from the pivotal Phase III LEAP-012 trial. The results of this trial were presented at the European Society for Medical Oncology (ESMO) Annual Congress 2024 held in September 20241 and published in The Lancet in January 2025.2 In this trial, LENVIMA in combination with pembrolizumab and TACE (the "combination therapy") demonstrated a statistically significant and clinically meaningful improvement in one of the trial’s primary endpoints, progression-free survival (PFS), reducing the risk of disease progression or death by 34% (Hazard Ratio [HR]=0.66 [95% Confidence Interval (CI), 0.51-0.84]; p=0.0002) compared to TACE alone*.2 Median PFS was 14.6 months(95% CI, 12.6-16.7) in the combination therapy and 10.0 months (95% CI, 8.1-12.2) in TACE alone. 2 At this analysis, a trend toward improvement in overall survival (OS), the trial’s other primary endpoint, was observed for the combination therapy versus TACE alone (HR=0.80 [95% CI, 0.57-1.11]; p=0.087). 2237 patients received the combination therapy and 241 patients received TACE alone.2 Treatment Emergent Adverse Events (TEAEs) occurred in 99.6% (n=236) of patients receiving the combination therapy versus 96.7% (n=233) of patients receiving TACE alone and led to the discontinuation of both study drugs in 13.1% (n=31) versus 4.1% (n=10) of patients, respectively.2 Grade 3, 4, or 5 TEAEs occurred in 82.3% (n=195) of patients receiving the combination therapy versus 47.7% (n=115) for TACE alone and TEAEs led to death in 4.2% (n=10) versus 2.5% (n=6) of patients, respectively.2Liver cancer is one of the leading causes of cancer-related deaths worldwide.3 In 2022, it was estimated there were more than 865,000 new cases globally and 367,000 in China, with more than 757,000 deaths worldwide, including 316,000 in China.3,4 China is estimated to account for more than 40% of global new cases and deaths.3,4 Hepatocellular carcinoma (HCC) is the most common type of liver cancer, representing approximately 90% of primary liver cancer cases.5 TACE has been a standard of care for patients with unresectable, non-metastatic HCC for many years. However, since many patients experience disease progression within one year6,7,8,9, new treatment options have been sought.LENVIMA monotherapy has been approved for the treatment of patients with unresectable HCC in more than 80 countries, including in Japan, the U.S., Europe and China and has made contributions to many patients to date. With this approval, it is expected that LENVIMA will further expand its contribution to patients with hepatocellular carcinoma in China.Eisai positions oncology as a key therapeutic area and is aiming to discover innovative new medicines with the potential to cure cancer. Eisai is committed to expanding the potential clinical benefits of lenvatinib for cancer treatment, as it seeks to contribute to addressing the diverse needs of, and increasing the benefits provided to, patients with cancer, their families and healthcare professionals.In March 2018, Eisai and Merck & Co., Inc., Rahway, through an affiliate, entered into a strategic collaboration for the worldwide co-development and co-commercialization of lenvatinib.*TACE alone: In addition to TACE, oral placebo and intravenous placebo corresponding to LENVIMA and pembrolizumab were administered.For more details, please visit: https://www.eisai.com/news/2025/pdf/enews202551pdf.pdfMedia Inquiries:Public Relations Department,Eisai Co., Ltd.+81-(0)3-3817-5120 Copyright 2025 JCN Newswire via SeaPRwire.com.

Olympus to take a significant equity stake in Swan EndoSurgical with a combined initial investment of at least $65 million.Swan EndoSurgical to develop an innovative endoluminal robotic system for less invasive therapeutic treatments.The total combined funding could reach up to $458 million if pre-agreed milestones are met and the program reaches term.TOKYO, July 25, 2025 - (JCN Newswire via SeaPRwire.com) - Olympus Corporation (Olympus), a global MedTech company committed to making people's lives healthier, safer, and more fulfilling, today announced the conclusion of an agreement with Revival Healthcare Capital (Revival) to drive advancements in endoluminal robotics. Olympus and Revival will co-found Swan EndoSurgical, a new company dedicated to developing a novel robotic system designed to revolutionize gastrointestinal (GI) patient care in the future.Logo of Swan EndoSurgicalEndoluminal robotics aims to empower more physicians to safely perform innovative techniques, enhancing patient access to treatment options that support safety and improved recovery times. This groundbreaking advancement has the potential to create new and significantly enhanced minimally invasive treatment options for major unmet medical needs by boosting precision and efficiency in procedures addressing ergonomic strain for healthcare professionals.Bob White, Representative Executive Officer, President and Chief Executive Officer at Olympus commented, “This partnership marks a significant milestone in our strategic initiative to advance endoluminal robotics. We are excited to enter this collaboration that we expect to play a pivotal role in reshaping the GI market by expanding procedural capabilities for physicians. This will allow the delivery of transformative, organ-sparing care that enhances outcomes for a broad patient population.”For decades, endoscopy—placing a flexible camera into an existing body orifice—has yielded early and accurate diagnoses of conditions such as GI tract cancer. In recent years, specialists, primarily gastroenterologists, have begun performing endoscopic therapeutic procedures, such as cancer resection, by inserting instruments through the endoscope. However, manual endoscopes and their instruments have limitations that make many advanced procedures within the lumen of the GI tract challenging and not widely available globally. The development of an endoluminal robot, with its ability to easily maneuver within the GI tract and deploy flexible arms, provides the opportunity for more patients to benefit from safe and effective procedures, potentially avoiding invasive surgery. This innovation allows for the early, safe, and effective treatment of lesions or tumors in the GI tract relative to current therapeutic options. Furthermore, the technology has the potential for application in numerous other disease areas.Headquartered in the United States, Swan EndoSurgical has assembled a leadership team of highly experienced industry professionals who will drive technical, clinical, and commercial development of the robotic platform. About Swan EndoSurgical Swan EndoSurgical, Inc. is an innovative start-up co-founded by Revival Healthcare Capital and Olympus that is focused on the development of endoluminal surgical robotics with the aim to create effective treatment of lesions or tumors in the GI tract relative to current therapeutic options. For additional information, visit the Company’s website at www.swanendosurgical.com or contact info@swansurg.com.About Revival Healthcare CapitalRevival Healthcare Capital is an investment firm focused on the MedTech sector. Revival specializes in transformative external innovation partnerships and other opportunities where its team of experienced operators and investors believes it can provide leadership, resources, and deep sector insights – beyond its capital – to further support companies' growth strategies. For additional information, visit Revival’s website at www.rvlhc.com or contact info@rvlhc.com .About OlympusAt Olympus, we are committed to Our Purpose of making people’s lives healthier, safer, and more fulfilling. As a global medical technology company, we partner with healthcare professionals to provide innovative solutions and services for early detection, diagnosis, and minimally invasive treatment, aiming to improve patient outcomes by elevating the standard of care in targeted disease states. For more than 100 years, Olympus has pursued a goal of contributing to society by producing products designed with the purpose of delivering optimal outcomes for its customers around the world. For more information, visit https://www.olympus-global.com/ and follow our global X account: @Olympus_Corp.Media contact:Mail: Global-Public_Relations@olympus.com Olympus Corp [TYO: 7733] [ADR: OLYMY] [STU: OLY1] [FRA: OLYS] https://www.olympus-global.com Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, July 25, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that it has been included in the FTSE4Good Index Series for the 24th consecutive year since its initial inclusion in 2002. The FTSE4Good Index Series is a global index series for socially responsible investment.The FTSE4Good Index Series was developed by FTSE Russell to promote investment in companies that meet global standards for Environmental, Social and Governance (ESG). Eisai received particularly high scores in “Corporate Governance”, “Anti-Corruption”, “Tax Transparency”, “Labor Standards”, “Customer Responsibility”, and “Water Security”. As of the end of June 2025, 2,045 companies worldwide and 278 Japanese companies were included in the FTSE4Good Index Series.In addition to the MSCI Selection Indexes, another global ESG investment index, Eisai is also listed in the FTSE Blossom Japan Index, the FTSE Blossom Japan Sector Relative Index, the MSCI Nihonkabu ESG Select Leaders Index, the MSCI Japan Empowering Women Index (WIN), the S&P/JPX Carbon Efficient Index and the Morningstar Japan ex-REIT Gender Diversity Tilt Index, which are ESG investment indices for Japanese stocks adopted by the Government Pension Investment Fund (GPIF).Eisai’s corporate concept is to give first thought to patients and people in the daily living domain, and to increase the benefits that health care provides to them, as well as address diverse healthcare needs worldwide. By strengthening its ESG initiatives and increasing non-financial value, Eisai is striving to sustainably enhance corporate value based on this concept.For more information on our sustainability initiatives, please visit https://www.eisai.com/sustainability/index.html.Also, we post and share related information on X, LinkedIn and Facebook.Media Inquiries:Public Relations Department,Eisai Co., Ltd.+81-(0)3-3817-5120 Copyright 2025 JCN Newswire via SeaPRwire.com.